Nail guns – or nailers as they’re also known – are one of the handiest tools in the toolbox. Far from being a luxury, it’s an essential piece of kit for any keen DIYer or tradesperson involved in construction.
It can help you get the job done quickly, and improve accuracy, as the nails are driven in at high speed. It could also save the odd finger here and there too!
However, as a repair and maintenance centre, we handle a significant number of nail guns every week that have stopped working due to a lack of regular servicing and basic care.
Nail gun maintenance doesn’t need to be carried out in a professional workshop. There are things you can do at home to keep your nail gun performing at its best. Not only will it help you save money in the long run, it will also ensure your safety.
Here we’ve put together our top four maintenance tips:
1. Cool it down
If you’re maintaining your nail gun after use, make sure you turn it off and let it cool down. Remove any gas, batteries or nails before conducting checks. This equipment is highly dangerous if handled incorrectly.
2. Oil it every day
The moving parts of the nail gun need to be oiled every day and in between sessions during periods of heavy use. Different manufacturers will recommend different oil types dependent on the machine you have, so check the manufacturer’s guidelines for suggestions. Pay particular attention to the O-rings inside.
3. Keep it clean
Airborne dust and debris can build up in the system and interrupt the nail feed. Use a degreaser to wipe off built-up dirt. Again, check the guidelines for recommended cleaners that match your brand. Avoid using a cleaner that leaves a sticky chemical residue. You can also rub down your gun with a lint-free cloth that won’t shed fibres.
5. Give it a once-over every month
Nail guns are subjected to high levels of pressure and movement, which means screws can loosen and parts can break off. Check it over once every month to make sure nothing is loose or out of place. Tighten bolts where necessary. Replace worn-out parts such as O-rings, battery pads and filters with approved spares or take it to our service centre for more advice. Make sure you’re using the right fuel cells – check they’re in date too!
If your nail gun isn’t performing correctly, don’t spend hundreds on a replacement until you’ve popped into our Redhill workshop. It’s open Monday to Friday, 7am to 6pm, so there’s plenty of opportunity to come along and speak to our expert team.