Paslode Spit P370 Spitfire Cartridge Nailer

The professional’s choice for cartridge nailing - Fully automatic Spitfire P370 is the easiest tool in the market to disassemble and maintain.

Features

• Automatic piston return - High install rate with low user fatigue
• Magazine or single shot tool - Automatic firing of up to 10 pins using the magazine
• Disc system - All metal cartridges eliminate warping at high temperatures. Sequential disc system means less load wastage
• Power adjustment - Versatile: one pin and one load can be adapted to fix into different base materials
• Sequential shot - Contact pressure of 17kg needs to be applied to activate safety trigger
• Ergonomic soft grip rear handle Makes fixing a one handed operation
• Window - User can see if a disc is loaded in the tool
• Energy absorbing bumper - Absorbs vibration and reduces recoil during firing
• Reload identification marker - Informs the user when to reload
• Adjustable magazine - 4 adjustable positions give greater flexibility when working in confined spaces
• Easy maintenance - The fastest powder tool to dismantle, clean and re -assemble allowing on site maintenance & reduced down time
• Universal piston - No need to change the piston for different substrates
• CPI accredited - Meets UK/International regulations

Substrates

• Concrete
• Steel
• Masonry

Application

Brick Tie. Composite Decking. Formstop. Dry Lining Track. Insulation Panels. Waterproofing. Steel Grid

Noise/Vibration Information

Noise Emissions: Measured values determined according to EN 12549. LwA, 1s dB (A) 114 LpA, 1s dB (A) 101 Measured according to EN ISO 8662 -11. HAV: The typical weighted acceleration does not exceed 6.6m/s2.

Kit Contains

011071 - Spitfire P370 with Magazine, single shot adaptor, high impact lightweight carry case, safety goggles to EN166:B, cleaning cloth, cleaning brushes, lubricating oil, push rod, stabiliser and instruction manual.

Specifications

Weight : 2.8kg

Length : 455mm

Pin Capacity : 10 pins - 1 strip

Impact Force : 360J

Actuation Pressure : 17kg

Cycle Rate : 1 pin / 1 sec

Rubber Spring Life : up to 3000 shots

Fastener Length : 15 - 60mm Collated

Electro Galvanising : 7 - 15 microns High Grade Steel