Makita DHP481RTJ 18V LXT Brushless Combi Drill - 2 x 5.0 Batteries

The Makita DHP481 LXT combi drill is powered by an 18v Lithium-ion battery and the brushless motor enables up to twice the run-time of traditional motors. This two-speed drill will run up to 2,100rpm in high gear and 550rpm in low. It will deliver 31,500 impacts per minute in high gear and 8,250 impacts per minute in low gear. The 13mm single sleeve keyless chuck enables 16mm capacity in masonry, 13mm in steel and a massive 76mm in timber. Torque can be adjusted to 21 alternative settings and has a dedicated drilling mode. The DHP481 will generate 60Nm of fastening torque (soft joint) and between 115-125Nm (hard joint), the highest torque yet from the Makita 18v range.

There are twin LED job lights with afterglow once the variable speed trigger is released and a new side handle configuration gives light tool control. Coupled with the soft grip ergonomic handle design positive drill-driver capability is assured. It weighs just 2.7kg, and is more compact (20mm shorter) than the previous BHP458 model.

This kit comes with 2x 5.0Ah Batteries and Charger packed in a Makpac Type 3 Carry Case with Side Handle and Depth Stop.

Features:

• Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge
• Forward/reverse rotation
• Single sleeve keyless chuck allows for easy bit installation/removal by one hand
• Electric brake
• Twin LED job light with afterglow
• 2 mechanical gears
• Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity
• Variable speed control by trigger
• Best possible ergonomic handle for drill-driver applications
• Compact overall length of 205mm
• XPT - Extreme Protection Technology

Included Accessories:

• 1x DHP481 Combi Drill
• 2x BL1850 5.0Ah Batteries
• 1x DC18RC Charger
• 1x Side Handle
• 1x Depth Stop
• 1x Belt Clip
• 1x Makpac Type 3 Carry Case